ECS RS485M-M, Manual, Page: 38 / 88

32
Using BIOS
Advanced BIOS Features
This option defines advanced information about your system.
Item Help
Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Hard Disk Boot Priority [Press Enter]
CPU Internal Cache [Enabled]
External Cache [Enabled]
Quick Power On Self Test [Enabled]
First Boot Device [Floppy]
Second Boot Device [Hard Disk]
Third Boot Device [CDROM]
Boot Other Device [Enabled]
Swap Floppy Drive [Disabled]
Boot Up Floppy Seek [Disabled]
Boot Up NumLock Status [On]
Gate A20 Option [Fast]
Typematic Rate Setting [Disabled]
Typematic Rate (Chars/Sec0 6
Typematic Delay (Msec) 250
Security Option [Setup]
APIC Mode [Enabled]
OS Select For DRAM>64MB [Non-OS2]
123
123
123
X
X
CPU Feature [Press Enter]
ATA 66/100 IDE Cable Msg [Enabled]
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
ATA 66/100 IDE Cable Msg. (Enabled)
Enables or disables the ATA 66/100 IDE Cable Msg. This message will appear during
reboot when you use 40-pin cable on your 66/100 hard disks.
CPU Feature (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
NPT Fid control [Auto]
NPT Vid control [Auto]
Item Help
Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
CPU Feature
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
NPT Fid control (Auto)
NPT Vid control (Auto)
This item allows users to adjust the CPU frequency; the range will be varied according
to different CPUs. We strongly recommend you leave this item at its default value.
This item allows users to adjust the CPU voltage. We strongly recommend you leave
this item at its default value.