manualshive.com logo in svg

ECS H61H2-M16, User Manual, Page: 59 / 72

Share
Download
ECS H61H2-M16 User Manual Download Page 59

H61H2-M16 USER MANUAL

55

Chapter 3

    CSM parameters

Scroll to this item and press <Enter> to view the following screen.

Launch CSM (Always)

This option controls if CSM will be launched.

Launch PXE OpROM policy (Do not Launch)

This controls the execution of UEFI and Legacy PXE OpROM.

Launch Storage OpROM policy (Legacy only)

This controls the execution of UEFI and Legacy Storage OpROM.

Launch Video OpROM policy (Legacy only)

This controls the execution of UEFI and Legacy Video OpROM.

Other PCI device ROM priority (Legacy OpROM)

For PCI devices other than Network, Mass storage or Video defines which OpROM to
launch.

Boot option filter (UEFI and Legacy)

This option controls what devices system can boot to.

Hard Disk Drive/ CD/DVD ROM Drive/ USB/IDE Floppy Drive/ USB CD/DVD ROM Drive/
USB HardDisk Drive/ USB Flash Drive/ NETWORK Device Drive Priorities

These items enable you to specify the sequence of loading the operating system.
Press <Enter> to see the submenu.

CSM parameters

OpROM execution, boot options filter,etc.

Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.

          F1:General Help

+/-  : Change Opt.

Enter : Select

:Select Screen

:Select Item

          F2:Previous Values

          F3:Optimized Defaults

          F4:Save & Exit

          ESC:Exit

 

Version 2.15.1229. Copyright (C) 2012, American Megatrends, Inc.

Launch CSM

 [Always]

Boot option filter

[UEFI and Legacy]

Launch PXE OpROM policy

[Do not launch]

Launch Storage OpROM policy

[Legacy only]

Launch Video OpROM policy

[Legacy only]

Other PCI device ROM priority

[Legacy OpROM]

This option controls if CSM
will be launched

Main

  

 Advanced

   

   Chipset 

 

    M.I.B III      

Boot 

     Security      Exit

Summary of Contents for H61H2-M16









































































Reviews:

No comments