manualshive.com logo in svg

ECS H61H2-M16, User Manual, Page: 45 / 72

Share
Download
ECS H61H2-M16 User Manual Download Page 45

H61H2-M16 USER MANUAL

41

Chapter 3

Parallel Port Configuration

Scroll to this item and press <Enter> to view the following screen:

Parallel Port (Enabled)

This item allows you to enable or disable parallel port.

Device Settings (IO=378h; IRQ=5)

This item shows the information of the device settings.

Change Settings (Auto)

Use this item to change device settings.

Parallel Port Configuration

Parallel Port

[Enabled]

Device Settings

IO=378h; IRQ=5

Enable or Disable Parallel
Port (LPT/LPTE)

Change Settings

[Auto]

Device Mode                                                   [Standard Parallel...]

Press <Esc> to return to the Super IO Configuration page.

Press <Esc> to return to the Advanced Menu page.

Device Mode (Standard Parallel...)

Use this item to select device mode.

F2:Previous Values

F1:General Help

+/-  : Change Opt.

Enter : Select

:Select Screen

:Select Item

F3:Optimized Defaults
F4:Save & Exit
ESC:Exit

Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.

 

Version 2.15.1229. Copyright (C) 2012, American Megatrends, Inc.

Main

  

 

Advanced   

   Chipset      M.I.B III      Boot      Security      Exit

Summary of Contents for H61H2-M16









































































Reviews:

No comments