H61H2-M16 USER MANUAL
52
Chapter 3
Main
Advanced Chipset
M.I.B III
Boot Security Save & Exit
Long Duration Maintained (10)
Use this item to control the time window over PL1 value should be maintained. This
is for Turbo mode.
Short Duration Power Limit Override (Maximum)
Intel(R) Turbo Boost Technology will use this power limit for a very short duration.
After that, the long duration power limit will be honored.
Graphics Voltage(1/256) (0)
This item allows you to adjust the internal GFX voltage.
Graphics Core Ratio Limit (23)
This item allows you to control the internal GFX Turbo ratio
.
Press <Esc> to return to the M.I.B III menu page.
The selection of Performance
Memory Profiles which impacts
memory sizing behavior.
Chipset OverClocking Configuration
Scroll to this item to view the following screen:
Memory Multiplier Configuration
Performance Memory Profiles
[Automatic]
XMP Profile 1
Supported
XMP Profile 2
Not Supported
Memory Timing Configuration
CAS# Latency (tCL)
9
RAS# to CAS# Delay (tRCD)
9
Row Precharge Time (tRP)
9
RAS# Active Time ( tRAS)
24
Write Recovery Time (tWR)
10
Row Refresh Cycle Time (tRFC)
74
Active to Active Delay (tRRD)
4
Write to Read Delay (tWTR)
5
Read CAS# Precharge (tRTP)
5
Four Active Window Delay (tFAW)
20
CAS Latency (tCL) (9)
This item determines the operation of DDR SDRAM memory CAS (colulmn address
strobe). It is recommended that you leave this item at the default value. The 2T
setting requires faster memory that specifically supports this mode.
F2:Previous Values
F1:General Help
+/- : Change Opt.
Enter : Select
:Select Screen
:Select Item
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
XMP Profile 1/2 (Supported/Not Supported)
These items show the information of Performance Memory Profile.
Performance Memory Profiles (Automatic)
This item enables you to set the Performance Memory Profile.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1229. Copyright (C) 2012, American Megatrends, Inc.
Main
Advanced
Chipset
M.I.B III
Boot Security Exit