manualshive.com logo in svg

ECS H61H2-M16, User Manual, Page: 46 / 72

Share
Download
ECS H61H2-M16 User Manual Download Page 46

H61H2-M16 USER MANUAL

42

Chapter 3

Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.

          F1:General Help

+/-  : Change Opt.

Enter : Select

:Select Screen

:Select Item

          F2:Previous Values

          F3:Optimized Defaults

          F4:Save & Exit

          ESC:Exit

 

Version 2.15.1229. Copyright (C) 2012, American Megatrends, Inc.

Main

  

 

Advanced   

   Chipset      M.I.B III      Boot      Security      Exit

ISCT Configuration

                     [Enabled]

ISCT Notification Control

                     [Enabled]

ISCT WLAN Power Control

                     [Enabled]

ISCT WWAN Power Control

                     [Enabled]

ISCT Sleep Duration Value Format

                    

[Actual Time]

Enabled/Disabled ISCT Configura-
tion

ISCT Configuration (Enabled)

Use this item to enable/disable ISCT Configuration.

     Intel(R) Smart Connect Technology

Use this item to show the information of Intel(R) Smart Connect Technology.

ISCT Notification Control (Enabled)

Use this item to enable/disable ISCT Notification Control.

ISCT WLAN Power Control (Enabled)

Use this item to enable/disable ISCT WLAN Power Control.

ISCT WWAN Power Control (Enabled)

Use this item to enable/disable ISCT WWAN Power Control.

ISCT Sleep Duration Value Format (Actual Time)

Use this item to select actual time or duration in seconds. (ISCT 2.0)

Summary of Contents for H61H2-M16









































































Reviews:

No comments