manualshive.com logo in svg

ECS H61H2-M16, User Manual, Page: 42 / 72

Share
Download
ECS H61H2-M16 User Manual Download Page 42

H61H2-M16 USER MANUAL

38

Chapter 3

USB Configuration

Scroll to this item and press <Enter> to view the following screen:

All USB Devices (Enabled)

Use this item to enable or disable all USB devices.

Legacy USB Support (Enabled)

Use this item to enable or disable support for legacy USB devices. Setting to Audio
allows the system to detect the presence of the USB device at startup. If detected,
the USB controller legacy mode is enabled. If no USB device is detected, the legacy
USB support is disabled.

USB Configuration

All USB Devices

[Enabled]

USB Support Parameters

Legacy USB Support

[Enabled]

Press <Esc> to return to the Advanced Menu page.

F2:Previous Values

F1:General Help

+/-  : Change Opt.

Enter : Select

:Select Screen

:Select Item

F3:Optimized Defaults
F4:Save & Exit
ESC:Exit

Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.

 

Version 2.15.1229. Copyright (C) 2012, American Megatrends, Inc.

Main

  

 

Advanced   

   Chipset      M.I.B III      Boot      Security      Exit

Summary of Contents for H61H2-M16









































































Reviews:

No comments