manualshive.com logo in svg

ECS H61H2-M16, User Manual, Page: 22 / 72

Share
Download
ECS H61H2-M16 User Manual Download Page 22

Chapter 2

H61H2-M16 USER MANUAL

18

6. COM1~2: Onboard serial port headers

Connect serial port extension brackets to these headers to add serial ports to your
system.

Unlike F_USB2 in this mainboard, F_USB1 supports EZ Charger technology, provides
3 times current than general USB port in off mode for USB devices. It is useful and
excellent, especially for the iPhone, iPad and iPod touch devices that need a large
amount of current for faster recharging within less time.

The motherboard has two USB 2.0 headers supporting four USB 2.0 ports. Addition-
ally, some computer cases have USB ports at the front of the case. If you have this
kind of case, use auxiliary USB connector to connect the front-mounted ports to the
motherboard.

5. F_USB1~2: Front Panel USB 2.0 headers (F_USB1 supports EZ Charger)

Please make sure that the USB cable has the same pin assignment as indi-
cated above. A different pin assignment may cause damage or system hang-
up.

Summary of Contents for H61H2-M16









































































Reviews:

No comments