Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – F-33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –
www.ecreso.com – [email protected]
Helios 20, 50 or 100 W, User Manual – 01/2011
Page 56
6.3.2. System parameters
This system menu enables you to customize your transmitter settings.
Using it you can select the displayed information in distant mode, know the device name and software
version, you can consult the events formerly appeared, enter the name of the FM radio, or enter a
password and select the serial port transmission speed.
To navigate through the menus, see ‘SYSTEM Parameter menu”.
SYSTEM
ENTER
Select this menu and press ENTER.
NO LOG
HEL00 REV.2.51T
LOG: shows events that happened while in distant mode.
OR
NO LOG
GLT00 REV.2.51T
HEL xx: identification of the transmitter. If a telecommunication card is
available, 64 different addresses can be entered. If no telecommunication
card is present, the address is 00.
OR
NO LOG
GLP00 REV.2.51T
REVx.xxX software v menu type
CHG DISPLAY
BARGRAPH POWER
Enables to display one of the 5 parameters hereafter below the line
indicating frequency and power. Validate to display them.
BARGRAPH POWER
- OK +
Displays bargraph of the output power.
NAME / POWER
- OK +
Alternatively displays the radio name and output power.
BARGRAPH DEV
- OK +
Displays the deviation bargraph.
NAME / POWER
- OK +
Alternatively displays the radio name and output power.
STATION’S NAME
- OK +
Selects radio name. Then confirm one of these 5 options.
CHG PASSWORD
- - - -
Add a password to lock transmitter settings.
Summary of Contents for HELIOS 100W
Page 2: ......