3
EDEM
SPLIT-TYPE ROOM AIR CONDITIONER
READ THIS MANUAL
SAFETY PRECAUTIONS
Read Safety Precautions Before Installation
Incorrect installation due to ignoring instructions can cause
serious damage or injury.
The seriousness of potential damage or injuries is classified as
either a WARNING or CAUTION.
Do not modify the length of the power supply cord or use an
extension cord to power the unit.
Do not share the electrical outlet with other appliances. Improper or
insufficient power supply can cause fire or electrical shock.
When connecting refrigerant piping, do not let substances or gases
other than the specified refrigerant enter the unit. The presence of
other gases or substances will lower the unit’s capacity, and can
cause abnormally high pressure in the refrigeration cycle. This can
cause explosion and injury.
Do not allow children to play with the air conditioner. Children
must be supervised around the unit at all times.
Installation must be performed by an authorized dealer or
specialist. Defective installation can cause water leakage, electrical
shock, or fire.
Installation must be performed according to the installation
instructions. Improper installation can cause water leakage,
electrical shock, or fire. (In North America, installation must be
performed in accordance with the requirement of NEC and CEC by
authorized personnel only).
Contact an authorized service technician for repair or maintenance
of this unit.
Only use the included accessories, parts, and specified parts for
installation. Using non-standard parts can cause water leakage,
electrical shock, fire, and can cause the unit to fail.
Install the unit in a firm location that can support the unit’s weight.
If the chosen location cannot support the unit’s weight, or the
installation is not done properly, the unit may drop and cause
serious injury and damage.
For units that have an auxiliary electric heater, do not install the unit
within 1 meter (3 feet) of any combustible materials.
Do not install the unit in a location that may be exposed to
combustible gas leaks. If combustible gas accumulates around the
unit, it may cause fire.
Do not operate your air conditioner in a wet room such as a
bathroom or laundry room. Too much exposure to water can cause
electrical components to short circuit.
The product must be properly grounded at the time of installation, or
electrical shock may occur.
Install drainage piping according to the instructions in this manual.
Improper drainage may cause water damage to your home and
property.
This air-conditioning unit contains fluorinated gasses. For specific
information on the type of gas and the amount, please refer to the
relevant label on the unit itself.
Installation, service, maintenance and repair of this unit must be
performed by a certified technician.
Product uninstallation and recycling must be performed by a
certified technician.
If the system has a leak-detection system installed, it must be
checked for leaks at least every 12 months.
When the unit is checked for leaks, proper record-keeping of all
checks is strongly recommended.
WARNING
Indicates that ignoring instructions may cause
moderate injury to your person, or damage to your
unit or other property.
This symbol indicates that you must never perform the
action indicated.
CAUTION
This symbol indicates that ignoring instructions may
cause moderate injury to your person, or damage to
your unit or other property.
WARNING
CAUTIONS
For all electrical work, follow all local and national wiring
standards, regulations, and the Installation Manual. You must use
an independent circuit and single outlet to supply power. Do not
connect other appliances to the same outlet. Insufficient electrical
capacity or defects in electrical work can cause electrical shock or
fire.
For all electrical work, use the specified cables. Connect cables
tightly, and clamp them securely to prevent external forces from
damaging the terminal. Improper electrical connections can
overheat and cause fire, and may also cause shock.
All wiring must be properly arranged to ensure that the control
board cover can close properly. If the control board cover is not
closed properly, it can lead to corrosion and cause the connection
points on the terminal to heat up, catch fire, or cause electrical
shock.
In certain functional environments, such as kitchens, server rooms,
etc., the use of specially designed air-conditioning units is highly
recommended.
1
1
2
1
2
3
4
5
2
3
4
5
6
7
8
9
NOTE
About fluorinated gasses
Summary of Contents for EDEM
Page 32: ......
