19
EDEM
SPLIT-TYPE ROOM AIR CONDITIONER
Step 3: Anchor outdoor unit
The outdoor unit can be anchored to the ground or to a wall-
mounted bracket.
The following is a list of different outdoor unit sizes and the
distance between their mounting feet.
Prepare the installation base of the unit according to the
dimensions below.
WHEN DRILLING INTO CONCRETE, EYE PROTECTION IS
RECOMMENDED AT ALL TIMES.
If you will install the unit on the ground or on a concrete
mounting platform, do the following:
Mark the positions for four expansion bolts based on dimensions
in the Unit Mounting Dimensions chart.
Pre-drill holes for expansion bolts.
Clean concrete dust away from holes.
Place a nut on the end of each expansion bolt.
Hammer expansion bolts into the pre-drilled holes.
Remove the nuts from expansion bolts, and place outdoor unit
on bolts.
Put washer on each expansion bolt, then replace the nuts.
Using a wrench, tighten each nut until snug.
unit mounting dimenSionS
1
2
3
4
5
6
7
8
WARNING
Summary of Contents for EDEM
Page 32: ......
