29
ECOTHERM
Heat transfer solutions
®
Operating Instructions High Capacity Water Heaters Models EHRE/EHPE & EDRE - ELC 11
7.3.1.9 Network settings
If you choose „Network settings“ at the service page, IP-
adresses, subnet mask and gateway of the control can
be adjusted.
the numeric keypady has to be adjusted individually.
Please get in contact with your IT-specialist if you do not
know the network settings of your network.
after correcting the network settings, please push the
button „accept adjustments“, so that the network settings
can be setted up in the control.
if you push the button „back“, the old network settings
remain valid.
7.3.1.10 Data management
operating parameters and service data can be saved
here respectively reloaded at further needs.
7.3.2 Parameter input
7.3.2.1 Parameter input
At pushing „parameter input“ you reach the same-named
mask via the home page.
all the parameters such as for instance operating mode,
temperature, way of flushing and further inputs which are
important for the operation of the plant, can be entered
here.
(Saety level 0)
total operating time in days
total charging time in hours
used software version of elC11
Control unit
figure 18
figure 19
figure 20
figure 21
