Adjusting the Wire Stand
4
Wire Stand Positions
The wire stand on the Fresh Air To Go allows for quick release from the
base, provides a stand or hanger for the unit independent of the base,
and allows the unit to either stand or hang from the base depending
on how the base is mounted.
To adjust the wire stand, loosen the two knobs on the sides of the
unit approximately 1/2 turn. The unit may then be tilted up or down
to adjust the angle or moved on the wire stand to change the height.
You can also remove and change the position of the wire stand to
accomodate several different mounting methods. To reinstall, simply
align the two clamp collars and insert the wire stand. Once the unit is
adjusted, tighten both knobs to hold it in place.
OR
• Sitting on a flat surface with or without the base
• Hanging over an edge pointing down (laundry
hamper, garbage can, etc)
• Sitting on a flat surface without the base
• On a vertical surface with the base (wall mount,
window, etc.)
• Hanging over an edge pointing up (seat pocket
in car)
• Hanging from an inclined surface (windshield,
under dash, etc)
• Hanging on an edge pointing in (closet shelf)
• Hanging on an edge pointing out (shelf edge)
