background image

                      
A erolet  Installation  - C O 61 - version: 01 -E N  - Jan. 2018

17

Installing the Aerolet in combination with a

shower WC (Bidet-system)     

C

 The Aerolet lift in combination with a bidet system, is              

 possible in many cases.

C

 An additional (extra) 100-230V socket and a water                 

 connection must be made before placing this combination.

  The drawing below shows an example. Read also the Bidet   

 installation manual.

C

 It must be taken into account that this combination requires   

 more space from the toilet seat fixing points, at least 105 +    
 70 = 175 mm from the bowl seat holes to the cistern-pipe or  
 to the back wall if there is no pipe.

!This means that this  combina-

tion cann´t be placed over a
closed couples or over a  toilet
with a low-hanging cistern or a
wall-closet that is close to the
wall. Solution might be hanging
the cistern higher or replace
the bowl.

 In that case there must be a

minimum space  of 70 mm
between the bidet backside
and the cistern-pipe.

 (See also pages 8-9)

 Follow the installation instruc-

tions on page 14-16.

Summary of Contents for Aerolet





























Reviews: