Economic Holland Aerolet, Manual And Installation

Page: 15 / 28

A erolet Installation - C O 61 - version: 01 -E N - Jan. 2018
15
Installing the Aero let on a toilet bowl
(floor- or wall hanging toilet)
Warning
C
Since the toilet lift is mounted on a toilet bowl, this toilet bowl
is part of the system. Make sure that the toilet bowl is firmly
anchored to the floor.
C
Remove the existing seat from the toilet bowl.
C
Connect the lift to 100-230 Volt and rise the seat frame by
approx. 15 cm so that fixation bow A is visible.
!
Press the fittings G into the mounting holes of the toilet
bowl. If neccessary, trim the fittings to fit the holes (see
detail page 14).
• Or use the fixation set with the expander
B .
C
Attach the fixation bow A to the toilet bowl with the
mounting set. If necessary, turn adjusting feet S " so that
fixation bow A is "flat" on the toilet bowl. Secure feet S ".
C
Connect the lift to 100-230 Volt and check the operation.
• If necessary, turn the adjustable feet S " and secure them.