8
by an authorized qualified person and the appliance is only guaranteed after correct
installation.
Risk of electric shock, short circuit or fire by damage of the mains lead! The mains lead
must not be clamped, bent or trapped or come into contact with hot parts of the
appliance. If the mains lead is damaged, it must be replaced by a qualified electrician.
The mains supply must correspond to be data specified on the rating plate of the
appliance. The appliance mains cable must correspond to the specifications and the
power consumption.
Risk of electric shock!
Before starting any work on the electrical installation, please disconnect the
appliance from the mains supply.
Installation
1
、
Slide the oven into the cabinet aperture, align and secure.
2
、
Fix your oven with the 2 screws and washers as indicated in the figure.
Final check
1. Connect the appliance to the mains supply and switch on the mains supply.
2. Check function.
Prior to start up of the appliance
➢
Once this simple operation has been carried out the oven is ready to use for cooking.
➢
This appliance is exclusively for domestic use.
➢
Use the oven to cook food only.
➢
Before cooking,make sure all oven accessories that are not required are removed from
the oven.
➢
Pre-heat the oven to the cooking temperature before using it.
➢
Place the cooking trays in the center of oven and leave space in between when using
more than one,so that the air can circulate.
➢
Do not put oven trays on the base of the oven or cover it with aluminium foil. This will
cause thermal accumulation. The cooking and roasting times will not coincide and the
enamel may be damaged.
➢
Try to open the oven door as little as possible to see the food (the oven light remains on
during cooking).
➢
Take care when opening the door to avoid contact with hot parts and steam.