16
closing signal, the failure code "E-3" will be displayed and the self-cleaning function will be
stopped. At this time, the door should be closed again and the self-cleaning function should
be restarted by pressing
“
”. When the temperature of the cavity exceeds 300
℃
,you can
press
“ ” to stop heating, but the oven door default can not be opened at this time. The
door can be opened only when cavity temperature drops below 300
℃
.
6
、
Attention for self-cleaning mode
➢
Before use of the pyrolytic function, you must remove the side shelf, oven pan and other
relative accessories to avoid damage in the high temperatures reached in the cycle.
➢
After using the pyrolytic function, do not use water or other washing agents.
➢
After use the pyrolytic function, you may find matter which was not removed in the side
of the cavity, this is to be expected. Use a microfiber cloth to remove.
➢
Before using the pyrolytic function, remove food residue and spillages from inside of the
oven cavity and prevent making a large amount of smoke and irritating smells during
the cycle.
➢
When using the self-cleaning function, the oven can produce smoke and irritant
smell,please keep the room well ventilated.
➢
When using the self-cleaning function, the outside temperature will be higher than
normal cooking temperature, do not touch the cavity casing and ensure children are
kept away from the oven to avoid getting hurt.
➢
When the seal of oven is found to be faulty or damaged, it should be replaced by a
suitably qualified person and only a genuine replacement door seal should be fitted.Do
not use alternative door seals as they may not be suitable.
7
、
Door lock function
No.
Function instruction
Relieve way
1
Self-check after power on, if the
detection signal is normal then exit,
otherwise show the fault code "E-3".
Long press
“ ” key to cancel the fault
code display, it will not affect normal
use.
2
Non-self-cleaning function mode,if
detected cavity temperature over
300
℃
then lock.
The lock will automatically relieve
when cavity temperature is below 300
℃
.
3
a. The door lock will be activated
automatically after the self-
cleaning starts.
b. During the operation
，
except for
pressing
“ ”
, any operation
of other keys will be useless if
oven door is locked. When oven
is in standby or power off status,
the door lock will automatically
unlocked when the cavity
’
s
center temperature falls below
300
℃
.
Door lock relieve:
When the oven is in the process of
self-cleaning, if work completed and
the oven enters standby mode,oven
door will be locked for the cavity
temperature is above 300
℃
,display
screen will show door lock icon
“
”
(display effect refer to pic 1 below).
Door lock will relieve automatically
after the cavity temperature is below
300
℃
,at this time,door lock icon
“
”
will automatically extinguish from the
display screen(display effect refer to
pic 2 below).