Econolux UBATPY60BK, Instruction Manual, Page: 14 / 31

14
3
、
The choice of function
Under standby status, switch different functions by rotating the programming switch KB1 in
turn, refer to Pic below for the order( not recyclable,oven function will remember the last
operation).
Function mode diagram
When selecting the function, the clock position shows the default time of the corresponding
function, the temperature position shows the default temperature of the corresponding
function.The first switch,
for temperature adjustable function level,default temperature value
and temperature icon
“℃”
will flash display;if temperature is not adjustable for that
function level,then default clock value and work time icon
“ ”
will flash display.
When selecting the function, you can switch into the temperature and working time
adjustment by touching
“ ”.
If adjusting temperature,temperature value and temperature
icon “ ” will flash display;if adjusting work time,clock value and work time icon “ ” will flash
display. Temperature value or time can be set by rotating the programming switch KB2.
If the working time and temperature are not set,or not touching
“ ” within 10 seconds of
completion, the system automatically returns to standby status.The default cooking
time,temperature and adjustable temperature range are attached behind.
Note: The grill function adjustable time range:5mins to 2 hours 30mins.
4
、
Reservation function
After setting cooking time and temperature and before touching
“ ” to start-up, touch “ ”
to enter to cooking end time setting (default end time=system time +setting cooking time),
cooking end time icon
“ ” will flash(1S/ time) ,
the hour value of the clock position flashes
at this time,rotating programming switch KB2 to set the hour time. After setting the hour time,
touch
“ ” again and enter the minute time setting. At this time, the minute value of the clock
position flashes, and the minute time can be set by rotating programming switch KB2, you
can use the
“ ” to switch hour and minute settings circularly. After cooking end time(hour
and minute) setting completed, touch
“ ” to start, system will automatically calculate the
grill start time (grill start time=cooking end time
–grill working time).
The oven will display system clock under reservation status, all output does not
work.Display effect refer to pic below.
Reservation status display effect