18
Heat element abnormality, alarm display effect
C
、
Door lock will self-check after power on, if the correct signal is not detected for 20
consecutive seconds, indicating a failure of the door lock, or the door is not
closed or is not closed in place during self-cleaning,
the screen displays E-3 if
the correct signal for the door is not detected. (refer to display effect
below).Touching “ ” key can return to standby status at this time.
Door lock abnormality, alarm display effect
D
、
When the oven is heated with a common function mode,and the cavity
temperature is above 300
℃
,the oven door will be locked automatically.At this
time,door lock icon
“
” will keep bright on the display screen.
Door lock will be automatically relieved when the cavity temperature is lower than
300
℃
,and door lock icon
“
” will automatically extinguish from the display
screen at this time.
9
、
Enquiry function
(1) Under cooking state, touch
“ ” key one time can query system time, the clock position
shows the current time of the system,second icon will flash. Re-touch
“ ” key or 10s later
automatically return to the cooking time display.
(2) At the end of the reminder time setting, reservation or cooking state,touch
“
” can
query the alarm remaining countdown. Re-
touch “ ” key or 10s later automatically return to
its original state. You can query the remaining alarm time and reset the alarm time under
standby state, when the alarm countdown time is less than 1 minute, the clock position
shows 0: 00;
(3) In the reservation status, first touch of the
“ ” can query the cooking start time, the
clock position shows the cooking start time, clock value and
“ ” icon flashes. Re-touch
“ ” key or 10s later automatically return to the system time display.
10
、
Alarm function