Advanced Laundry Control System Installation & Operation Manual
46
Symptom Possible
Solution
Action
1.
Check pump tube.
1. Change pump tube.
2.
Check for input tube air leaks.
2. Change input tube or fittings.
3.
Check if product is too viscous and/or
if tubing run is too long.
3. Remedy this condition.
Pump runs, but no
product pumped.
4.
Check for clogged pickup tube.
4. Clear clog.
1. Check that water is supplied to flush
manifold.
1. Correct water flow situation.
Pumps do not run and
Flush Manifold valve
does not activate.
2. Check that the Flush Manifold
Interface cable is connected.
2. Connect the Flush Manifold
Interface cable.
Not counting formulas.
1.
Check if pump 3 washer signal
received.
1.
Correct signal or programming
error.
