4.8 RECORDS – See Figure 4 – 7
A file cabinet icon (located in the top right of the display) indicates that you are in a RECORDS screen. The
RECORDS programming menu includes software revision information, tube change histories/stamping,
pump run times, and clearing options (i.e. tube changes, run times, and load counts).
1.
SOFTWARE
– the display will indicate software revision number. Press the RIGHT arrow key to
advance to the next screen.
2.
P1 0000 0000
through
P6 0000 0000
– these screens indicate the last time a squeeze tube was
changed. The display format is MMDD HHMM (i.e. Month, Day, Hour, Minutes).
a. Press the UP arrow key to time-stamp a new tube change.
b. Press the DOWN arrow key to undo a NEW time-stamp.
c. Press the RIGHT arrow key to save the new time stamp and advance to the next screen.
3.
CLEAR LOG?
– Use the UP/DOWN arrow keys to toggle between YES and NO. If you select YES, all
tube change histories will be cleared. Press the RIGHT arrow key to accept the displayed response and
advance to the next screen.
4.
P1 TIME 0000
through
P6 TIME 0000
– these screens indicate cumulative run times (in hours) for each
pump. Press the RIGHT arrow key to advance to the next screen.
5.
CLEAR TIM?
– Use the UP/DOWN arrow keys to toggle between YES and NO. If you select YES, all
cumulative run times will be cleared. Press the RIGHT arrow key to accept the displayed response and
advance to the next screen.
Advanced Laundry Control System Installation & Operation Manual
33
6.
CLEAR CNT?
– Use the UP/DOWN arrow keys to toggle between YES and NO. If you select YES, all
load counts will be cleared. Press the RIGHT arrow key to accept the displayed response and advance
to the next screen.
