background image

Function Keys

The most important key is  Keep warm/Cancel . When the cooker is being programmed 
or any program is in effect, press this key will cancel the program and take the cooker to 
standby state. When the cooker is in standby state, pressing this key activates the keep-
warm program. 

The other function keys include  Preset (Hour/Minute) ,  Rice ,  Soup/Baby Food ,  Meat
/Ribs ,  Chicken/Duck ,  Beef/Tendons/Beans ,  Fish/Thrimps ,  Cake ,  Steam ,  Bake ,

Stew ,  Saute  and  Yogurt  keys. 

"

"

"

" "

" "

" "

" "

" "

" "

" "

" "

" "

"

"

" "

"

"

"

Before the First Use

Before the first use, please take out all accessories from the package and read this 
manual carefully. Please pay particular attention to operational instructions and cautions 
to avoid any injury or property damage. Please wash the inside of the lid and the inner 
pot with warm soapy water, rinse and dry thoroughly. Wipe the outer housing with a clean 
damp cloth. Never immerse the cooker housing in water or any other liquid. The inner pot,
sealing ring and exhaust valve and all accessories are dishwasher safe. But never clean
the lid and housing in a dishwasher.

Remove and Install the Anti-Block Shield

Remove and Install the Sealing Ring

The anti-block shield can be 
removed by pushing it on the 
side to lift it up. To install the 
anti-block shield, position it 
in place and press it down.

The sealing ring can be removed by 
pulling upwards from the sealing ring 
rack in sections. To install the sealing 
ring, pressing it down into the rack 
section by section. The sealing ring 
can be installed on either side facing up.

Please note the following:

Prior to each use, inspect to make sure the sealing ring is well seated in the sealing 
ring rack and the anti-block shield is mounted properly on the steam release pipe. 

After use, remove any foreign objects from the sealing ring and anti-block shield.

Keep the sealing ring clean to avoid odor. Washing the sealing ring in warm soapy 
water or dishwater can remove odor. However, it is normal for the sealing ring to 
absorb the smell of certain acidic foods. That is why it is always a good idea to have 
more than one sealing ring on hand.

Never pull the sealing ring by force, as the pulling may cause deformation and affect 
its function in sealing the pressure.

A sealing ring with cracks, cuts or other damages should not be used. A new sealing 
ring replacement should be used.

6

Summary of Contents for ECP5012

















Reviews: