background image

Care and Maintenance

Regular care or maintenance is essential in ensuring that this product is safe for use. 
If any of the following circumstances take place, please stop using the appliance 
immediately and contact support team.

     

Cleaning

Caution: 

please make sure the appliance has cooled down and is unplugged before 

cleaning.

Power cord and plug suffer from expansion, deformation, discoloration, damages, etc.

 

A portion of the power cord or the plug gets hotter than usual. 

Electric pressure cooker heats abnormally, emitting a burnt smell.

When power on, there are unusual sounds or vibrations.

If there is dust or dirt on the plug or socket, please remove dust or dirt with a dry brush.  

12

1. Clean the product after each use. Wipe the black inner housing rim and slot dry with 
    cloth to prevent rusting on the exterior pot rim.

2. Remove the lid and take out the inner pot, wash them with detergent, rinse with clear 
    water and then wipe dry with a soft cloth. The stainless steel inner pot is also 
    dishwasher safe.

3. Use water to clean the lid, including the sealing ring (which can be removed), exhaust 
    valve, anti-block shield, and wipe them clean with dry soft cloth. Do not take apart the 
    steam release pipe assembly.

4. Clean the cooker body with clean damp cloth. Do not immerse the cooker into water. 
    Do not use a wet cloth to clean the pot while the power cord is plugged into the power 
    outlet.

Summary of Contents for ECP5012

















Reviews: