Ecoglider RS I, User Manual

Page: 18 / 40

This E-bikes have an electric pedal assisted driving system. In EU countries, it is known legally as “PAS” cylce or Pedal Assisted
System.
The driving assisted system consists of a driving unit, a battery, a controller, and various electronic components (harness wires,
sensors and switches). It is important to know that when the assistant system is turned on, the driving unit engages to provide
power only while you are pedaling. The amount of power provided by unit depends on your pedaling force and the assistance
model/level you set with handlebar control unit at any time, if you stop pedaling, the drive assistant will disengage. In all
models/levels, the driving assisted system power reduces progressively and cuts off as the bike reaches a speed of
25km/h,(15.5mph), or sooner if you stop pedaling. The drive assist re-engages when speed drops below 25km/h, (15.5mph) as
long as the pedals are turning.
Page 15
If the e-bike is equipped with mufti-function display (see photo at left.), Which has
3 levels of PAS speed, power indicator on and light on/off..
Keep pressing '-' button to turn off PAS, you can pedal the bike normally. The driving
assistance system is not activated.
Hold the '+' button on meter can get higher PAS speed level. Each level of assist
corresponds to a maximum motor speed; at level 3, the motor runs at full power.
Overall range decrease at higher power levels.