Problem Possible Cause Remedy
No power when the switch is
turned “ON”
- Blown fuse
- Loose connectors
- Broke wire
- Faulty switch
- Faulty controller
- Replace fuse
- Check all connectors
- Inspect all wires for damage
- Replace switch and retest
- Replace controller and retest
Bicycle operates OK but
battery gauge does not light up
- Loose connectors
- Damaged wires
- Faulty battery gauge
- Check throttle and/or battery
gauge connectors
- Inspect all wires
- Replace battery gauge
Battery gauge lights up but
bicycle does not operate
- Faulty brake inhibitor
- Loose motor wire connector
- Replace brake inhibitor(s) and retest
- Check motor wire connector
Bicycle runs at full speed without
pedaling
- Faulty sensor
- Faulty throttle
- Faulty controller
- Replace sensor and retest
- Replace throttle and retest
- Replace controller and retest
Battery indicates full charge
when tested at the charge port
but bicycle does not operate
- Faulty controller
- Loose connectors
- Poor contact between battery terminals
- Replace controller
- Check all connectors
- Inspect and clean battery terminals
Throttle(on bicycle so equipped) does
Not sring back to neutral position
- Grip jammed against throttle
- Faulty throttle
- Reposition grip so gap between it and the
Throttle is 1-2mm
- Replace throttle
Page 35
Summary of Contents for RS I
Page 1: ...RS I RS II User s Manual...
Page 8: ...Page 4 Parts Diagram of Folding E Bicycle...
Page 9: ...Page 5 Wiring Diagram...
