Power indicator
When the throttle or sensor is engaged (Powering the motor) and the
e-bike is in motion, the LED on the battery gauge(on the throttle or
separate unit) indicate instantaneous line voltage as measured at
the battery terminals - not the available energy in the battery pack.
The line voltage will wing out from a dead stop, or going up a steep
hill, the motor will be under a high load and may show a reduced
number of LED or show the “Yellow” or even ”RED” LED.
When the throttle is disengaged (i.e. no power to the motor due to the
bicycle being Stationary or coasting) LED on the throttle will indicate
the voltage of the battery pack. The voltage of the battery pack will rise
when no load is on the motor. The best indication of how much battery
life is remaining is to check the throttle LED, after reaching cruising
speed, on a flat straight road as this will allow the battery voltage to
stabilize and give a much more accurate reading.
Page 14
Summary of Contents for RS I
Page 1: ...RS I RS II User s Manual...
Page 8: ...Page 4 Parts Diagram of Folding E Bicycle...
Page 9: ...Page 5 Wiring Diagram...
