ECOFOREST BREMEN Installation And Maintenance Manual Download Page 32

Page: 32 / 192

PLEASE BEWARE THAT...

Your stove is designed to burn wood pellets,

if you want to use other kinds of biomass fuels, check with your

dealer first.

In order to prevent the risk of accident, a correct installation must be done following the instructions of this

manual. Your

ECOFOREST

distributor will be available to help you and provide you information related to codes,

assembly and installation norms in your area.

The gas outlet system works is a vacuum system (no air within the burn pot), for this reason, it is necessary

for this system to be hermetically sealed. A regular check may be required to ensure a correct gas outlet.

It is recommended to clean the gas outlet system twice a year or

after having used 500kg of pellets

. To

prevent defects in operation,

it is required to install the gas outlet in a vertical position using a “T” a vertical tube

at least two metres in length (2m), never horizontally (see point 4).

The ground plug shall be connected to

230/240V - 50Hz. Please make sure the power cable does not remain

under the stove nor close to hot areas of the stoves and it is not in contact with sharp areas that could damage it.

When the stove is installed in a mobile-home, the ground plug shall be connected to a metallic part on the

ground and perfectly adjusted. Make sure the structure of the house supports the stove’s weight.

Make sure

the gas outlet flex going through the roof is not in contact with any flammable material

to avoid

any risk of fire.

AS ECOFOREST DO NOT HAVE DIRECT CONTROL ON THE INSTALLATION OF YOUR STOVE, ECOFOREST DO

NOT GUARANTEE IT AND DO NOT BEAR THE RESPONSIBILITY OF ANY DAMAGE THAT COULD RESULT FROM A BAD
USE OR A BAD INSTALLATION.

WE CAREFULLY RECOMMEND THE HEAT CALCULATION TO BE MADE BY A QUALIFIED HEATING ENGINEER.

ADVICE AND RECOMMENDATIONS.

2.1.

Place the stove on a stable area to avoid unexpected shifts.

2.2

Never use petrol, fuel for lanterns, kerosene nor any similar liquid. Keep this kind of fuel away from your
stove.

2.3.

Do not try to turn on your stove if some glass is broken.

2.4.

Make sure the glass door of the fireplace is well closed while the stove is in operation; also check the

cleaning hatches (if you have touched them).

2.5.

Do not overload the stove; continuous heating efforts might cause premature aging and damage paint (it is
recommended not to exceed 250°C for gas outlet temperature).

2.6.

Do not use the stove as a burner.

2.7.

The stove shall always be connected to a ground plug and an AC stable supply of

230/240V - 50Hz and sine

wave.

2.8.

This device should not be used by children or persons with reduced physical, sensory or mental capacities, or
lack of experience and knowledge, without proper supervision and instruction. Children should be supervised
to prevent misuse of the machine.

2.9.

WARNING:

Do not open the door while the stove is operating.

2.10.

To prevent possible electrical shocks, only trained personnel should have access to the sides and the back of
the stove.

FUEL QUALITY.

Your stove

is designed to operate

with wood pellets;

however, it can also work with other biomass fuels (ask

your dealer about this). Many types of pellets are sold on the market, with very different quality levels. For this
reason, it is very important to choose pellets free from dirt, with no excessive level of damp nor additives that
compact sawdust.

The stove output may vary depending on the type of pellets you use.

ECOFOREST

do not have any control on the quality of the pellets you use. For this reason,

ECOFOREST

cannot

guarantee the full output of your stove nor the eventual premature aging or eventual damage of the gas outlet.

It is