ECOFOREST BREMEN, Installation And Maintenance Manual

Page: 30 / 192

29
PLEASE READ THIS MANUAL COMPLETELY BEFORE THE INSTALLATION OF YOUR PELLETS (BIOFUEL) STOVE.
NOT CONSIDERING PRESENT INSTRUCTIONS MAY CAUSE DOMESTIC AND/OR PERSONAL DAMAGES.
QUICK MANUAL FOR START-UP.
The first step consists in connecting the stove to current.
On the display panel, a start-up sequence appears indicating the model of your stove, the version of the
software as well as the last date of revision of the software.
Then, add pellets in the fuel hopper the and close the door.
Once these operations achieved, please make sure the hopper is free from any object that might prevent
combustion – that is, it should contain only the burn pot.
Make sure the glass door is perfectly closed to ensure optimal operation.
Now, the stove can be turned on. At first operation, it is necessary to open the windows as a light smell of
paint might appear.
Press the On button (

) represented by

symbol, the stove will turn on automatically.
This process goes through different phases: ignition, preheating, and normal operation. This is the process
where the flame first appears. The preheating is a completely automatic step during which the stove will reach the
minimum temperature level. The normal functioning step is where the stove is ready to get the temperature that
you will indicate.
In order to increase or decrease the temperature, please push the increase button (
C
) represented by “

“
or the decrease button (
V
) represented by symbol “

” as you wish.
To stop it, please press the off button (

) represented by symbol

; please do not disconnect the stove.
Programming will be done with the MENU button (

), (see user manual).
In any case, and after these brief explanations, it is highly recommended to read the installation and
maintenance manual and the user manual carefully so as to avoid eventual mistakes in the installation and use.

Menu button.

Turning on-off button.

Fuel decreasing button.

Fuel increasing button.

Liquid crystal display (LCD).

Infrared receiver.