ECOFOREST BREMEN, Installation And Maintenance Manual

Page: 51 / 192

50
MOTORS OUTLET
DISCONNECTED.

The Unicontrol does not detect items of
~
230/240V - 50Hz. If the stove is new, this
might be caused by electrical problems. If it
happens after repair, it might be due to the
non connection of the motors terminal strips.

Disconnect the Test of Control of the
hardware in menu 1-7b, disconnect the stove
and connect it again; if everything works well,
tension decreases or you hear noise in the
electric mains.
CONTROL UNIT ERROR.

Failure or possible failure in the Unicontrol.

Check with a multimeter that the motors are
not in short-circuits.

Disconnect the Test of Control of the
hardware in menu 1-7b, disconnect the stove
and connect it again; if everything works well,
tension decreases or you hear noise in the
electric mains.
PROBES EXCHANGED

Gas outlet probe is exchanged by the NTC.
 The thermocouple and NTC are exchanged,
see wiring diagram.