P a g e
|
6
Version10- March 2017
Eco Pacific Pty Ltd
All the PCB electronics of the Optional Wall Controller are fitted into a fire resistant heavy
duty ABS plastic enclosure.
2
CONTRACTOR’S RESPONSIBILITIES
Application
The manufacturer supplying the HRV relies on the Contractor to apply and install the unit so
that it will provide a satisfactory operation. The total system must satisfy the customer’s
needs and operate within the published limits of the HRV.
Installation
The Contractor should ensure HRV units are installed in accordance with the procedures
outlined in this publication, as well as abiding by the HRV
’s specific installation
requirements.
Service
If a problem arises, the Contractor is to ensure a qualified repair person resolves the
customer’s difficulties.
2.1 EQUIPMENT INSPECTION
CONDITION OF SALE FOR WARRANTY
-
The HRV's are sold through a Supplier Dealer Network with the following responsibilities
entrusted to them;
•
Do not install the unit without reading the instructions
.
•
The unit should be inspected on delivery for possible internal and or external damage
incurred during transport and handling. If any damage is detected, it should be noted
on the delivery docket with photo evidence attached and be sent to the local agent /
dealer. The damage should be claimed within three days from inspection.
•
The manufacturer supplying the HRV relies on the dealer / contractor / installer to install
it satisfactorily in accordance with these instructions.
•
The installation should allow satisfactory operation of the HRV to provide fresh filtered
air to the indoor environment with the filter box fitted outside in fresh air.
•
Ensure that the filter of the filter-box is easily accessible to the user for routine cleaning,
service, and maintenance.
•
It is the responsibility of the dealer / contractor to ensure that a suitably qualified and
well trained person is engaged for installation and service of these HRV's.
•
IMPORTANT:
ensure the electric cord suits local voltage. Do not operate the HRV if
voltages are different.
•
Note
: If the HRV is not installed and serviced according to these instructions, the
manufacturer will not be able to meet the warranty conditions provided with the HRV.
3
INSTALLATION
3.1 SAFETY
Note: This HRV must only be installed by a fully qualified and licensed electrician.
These HRV's shall be installed in accordance with;
•
LOCAL HEALTH AND SAFETY REGULATIONS
•
Local plumbing and drainage codes
•
Local wiring codes and rules for electrical connections (refer to HRV electrical wiring
requirement shown on specification plate on the cabinet).
