P a g e
|
13
Version10- March 2017
Eco Pacific Pty Ltd
4. The outdoor air intake and indoor air intake should be well protected from children, and
from intrusion of birds, rodents, or insects.
5. Make sure that for cold room or add on with refrigerated units, the FreshVent HRV's drain
discharge is connected to the nearest ground water drain with appropriate gravity fall as
per these installation instructions.
6. Check load Amp runs are within design specs.
7. Ensure the air flow is in the right direction, is smooth and balanced if using a damper or
diffuser.
8. Ensure the ducts are not interfering any other ducts and are air tight.
9. Check the wall controller is mounted firmly on the wall with clear passage to the power
cord, and tele connector without interfering with its surrounding.
Make sure the wall controller’s vicinity is free for air flow from all sides to allow
natural air flow through its surrounding to sense air particles for CO
2
, and for any
movement/ motion of anybody around it.
10.
On installation
;
The
installer
has to fill in the following information for each installation and give
this manual to the customer;
Installation Details for warranty purpose
•
Order number
•
Customer Name
•
Address of installation
•
Delivery date
•
Model name
•
Model Number
•
Serial number
•
Installer’s full name
•
Installer’s
mobile number
•
Dealer / Contractor company name address and telephone number
•
Installation date
•
Installer’s
and Customers signatures
