21
5.2 Programming of the dosage
To program the doses proceed as follows:
Choose a filter holder and fill it with the desired quantity of coffee powder for the button you would like to program
(e. g. filter 1 cup for filter holder 1 cup: 7g coffee, button no. 1). Place a cup under the filter holder.
1
Press the P- key until the lamp above the button flashes.
2
Choose the button you would like to program and press it for a short time. Coffee is released into the cup.
3
As soon as the desired quantity of coffee is reached, press the button again. Thus, the dose for the chosen
button has been programmed.
4
The button for hot water is programmed in the same manner as the coffee buttons.
5
The right key pad is automatically programmed synchronously with the left key pad (with the exeption of the hot
water release). Only the left key pad requires programming.
6
In case of a descrepancy in the filling amounts on the right key pad, simply repeat the programming on the right
key pad. The left key pad will not be affected.
•
Please note that the doses can vary if different quantities of coffee are used for coffee preparation
or if the imposed pressure on the coffee is different while tamping.
•
Every button can be reprogrammed at any time.
5.3 Activation of the pre-infusion
During pre-infusion the coffee grounds are dampened prior to the espresso extraction and slowly well up. This makes
the coffee puck more stable and keeps it from being destroyed by the high brewing pressure. Furthermore, the oils
and aromas are able to develop prior to extraction.
Please follow below steps to activate the pre-infusion:
Only the left brew group is used to set up pre-infusion.
1
The machine is turned off.
2
Depress button 2 (1 espresso) and switch the machine on. The lamp of that button becomes illuminated.
Release the button.
3
Turn the machine off.
4
When the machine is then switched on again, the pre-infusion at both brew groups is activated on buttons 2 (1
espresso) and 3 (large cup) only. No provisions for a pre-infusion have been made for buttons 4 and 5.
5.4 Deactivating the pre-infusion
Please follow below steps to deactivate the pre-infusion:
Only the left brew group is used to deactivate pre-infusion.
1
The machine is turned off.
2
Depress button 3 (1 large cup) and switch the machine on. That button becomes illuminated. Release the
button.
3
Switch the machine off.
4
When the machine is then switched on again, the pre-infusion at both brew groups is deactivated.
Summary of Contents for 88644
Page 1: ......