24
Cleaning as necessary:
Clean the steam and hot water valve after every use.
Clean the body when the machine is switched off and cold.
Use a soft, damp cloth for cleaning.
Never use abrasive or chloric detergents!
7.2 Automatic group cleaning and degreasing of the brew groups
A brew group cleaner (in powder or tablet form) is available at your specialized dealer. The cleaning is carried out
using the blind filter included with delivery.
1
Heat up the machine.
2
Insert the blind filter into the filter holder.
3
Fill the blind filter with the group cleaning powder or with one tablet.
4
Clamp the filter holder into the brew group.
5
Start the brew group cleaning mode by simultaneously pressing the P-button and button no. 1 on the key pad of
the respective brew group. The cleaning mode commences, a flashing light appears on the control panel and
blinks on and off in several intervals. The cleaning program stops automatically after five cleaning cycles (the
pump runs for 15 seconds, turns off for 20 seconds, runs for 15 seconds, etc.).
6
Remove the filter holder with the blind filter and rinse it with fresh water. Then clamp it back into the brew
group.
7
Start the cleaning cycle again without using detergent and repeat step no. five.
8
Afterwards, unclamp the filter holder, take out the blind filter and reinsert the coffee filter into the filter holder.
Clamp the filter holder back into the brew group.
Caution!
Beware of hot water sprayings while cleaning the brew group.
7.3 Draining the boiler
1
Turn the machine off and let it cool down (pressure gauge 0.5 bars <).
2
Remove the drip tray.
3
Open the hot water valve (caution: hot water may spray).
4
The water is released by the collection container through the drainage hose.
5
The boiler is empty once no more water is shown in the water level indicator.
6
Close the hot water valve.
Summary of Contents for 88644
Page 1: ......