Eclipse CD3413 Owner'S Manual Download Page 40

Page: 40 / 76

How to operate the tuner

Press the [SEL] button for more than two seconds until a
beep is heard.

The automatic preset mode starts.
The [ASM ON] indicator on the screen flashes, and stations are
automatically entered in memory under buttons [1] to [6].
These buttons are called preset buttons.

ATTENTION

•Press any numbered button to select the station whose

frequency is indicated right above the button.

•When a new station is set in memory, the station previously set

in memory will be deleted.

•If there are fewer than six receivable stations, the stations set in

the remaining buttons will be retained.

Press the [FM AM] button to switch to the desired FM or
AM bands.

Entering stations into memory automatically
(The automatic preset mode: ASM)

Radio bands will switch from FM1

➔

FM2

➔

FM3

➔

AM in

order each time the button is pressed.

[FM AM] button

[SEL]
button

Buttons [1] to [6]

Summary of Contents for CD3413













































































Search results

Summary of Contents for CD3413

Reviews:

Related manuals for CD3413

Brands by name

Popular brands

Eclipse CD3413, Owner'S Manual

Search results

Summary of Contents for CD3413

Reviews:

Related manuals for CD3413

Brands by name

Popular brands