Eclipse CD3413 Owner'S Manual Download Page 6

Page: 6 / 76

• Avoid installing this product in places where it may get wet,

such as near windows, or in places that are moist or dusty.
Presence of liquid, moisture or dust inside this product can
cause short circuiting, resulting in smoke or fire.

• Do not install this product in locations where it cannot be

fastened securely, such as places subject to frequent vibration.
Otherwise, it may become dislodged and cause an accident or
injury.

• Do not block this product's vent or heat sink. If either is

blocked, excessive heat build-up may occur and cause a fire.

• If this product is not connected properly, a short circuit, fire or

accident may occur.

• When routing cables, use care so that they do not contact

sharp metal parts such as brackets or screw tips. Otherwise, a
short circuit, electric shock, fire or accident may result.

• Do not obstruct the vent on this product. If blocked, excessive

heat build-up may occur and cause a fire.

Caution

Summary of Contents for CD3413













































































Search results

Summary of Contents for CD3413

Reviews:

Related manuals for CD3413

Brands by name

Popular brands

Eclipse CD3413, Owner'S Manual

Search results

Summary of Contents for CD3413

Reviews:

Related manuals for CD3413

Brands by name

Popular brands