Eclipse CD3413 Owner'S Manual Download Page 51

Page: 51 / 76

How to use an optional NOB remote control

DISC

BAND

MODE

MUTE

ILLUMI

PWR

E-COM

TRACK

TUNE SEEK

SH-MOD

[PWR] button

[MUTE]
button

Remote-control
light receptor

[AUDIO
CONTROL]
button

Turning the power on/off

Press the [PWR] button.

The power turns on or off each time the button is pressed.

When the power is turned on, the state used when the power was
turned off such as CD and tuner playing is restored.

Adjusting the audio volume

Press the [AUDIO CONTROL] button, and turn it to the
left or right.

Each press of the button will switch the audio control modes.
Turn to the right: Increases the volume.
Turn to the left:

Decreases the volume.

ATTENTION

When the main unit is shut down, the remote control will not work.

How to use an optional NOB remote control

Cutting the volume instantly (muting)

Press the [MUTE] button to cut the volume or restore it
instantly.

Summary of Contents for CD3413













































































Search results

Summary of Contents for CD3413

Reviews:

Related manuals for CD3413

Brands by name

Popular brands

Eclipse CD3413, Owner'S Manual

Search results

Summary of Contents for CD3413

Reviews:

Related manuals for CD3413

Brands by name

Popular brands