Eclipse CD3413 Owner'S Manual Download Page 23

Page: 23 / 76

Basic operation

Various audio control modes may be fine-tuned using this
procedure.

Modes will switch in the order shown below each time the
button is pressed.

Switching audio control modes

Press the [AUDIO CONTROL] button for less than one
second to select the item to be adjusted.

Adjusts volume.
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Increases the volume.
Turn to the left:

Decreases the volume.

Adjusts treble level.
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Emphasizes high sounds.
Turn to the left:

Softens high sounds.

Adjusts bass level.
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Emphasizes low sounds.
Turn to the left:

Softens low sounds.

VOL (VOLUME) Mode

BASS Mode

TREB (TREBLE) Mode

[AUDIO CONTROL] button

VOL

BASS

TREB

BAL

FAD

NON-F

XO-NF

XO-FR

NF-PH

Summary of Contents for CD3413













































































Search results

Summary of Contents for CD3413

Reviews:

Eclipse CD3413, Owner'S Manual, Page: 23 / 76

Search results

Summary of Contents for CD3413

Reviews: