Eclipse CD3413 Owner'S Manual Download Page 26

Page: 26 / 76

Basic operation

A variety of settings can be changed.

The function mode is activated.

Setting items will be displayed in the following order when the
[SEL] button is turned to the right.

Making changes with Function Mode

Press the [FUNC] button.

Turn [SEL] button in either direction to display setting
items for selection.

[SEL]
button

[RTN]
button

[FUNC] button

The receiver is set at the factory to emit a beep tone in
response to button operation. The guide tone feature may be
disabled in the following procedure:

Turn [SEL] button to select GUIDE TONE.

Press the [SEL] button.

The Guide Tone Mode will be switched ON/OFF.

Turn [SEL] button to select ON or OFF.

Press the [RTN] button.

At this time, other adjustments can also be made in
Function Mode.

Press the [FUNC] button to exit Function Mode.

Disabling the guide tone feature (for button operation)

GUIDE TONE

CLOCK ADJ

Summary of Contents for CD3413













































































Search results

Summary of Contents for CD3413

Reviews:

Related manuals for CD3413

Brands by name

Popular brands

Eclipse CD3413, Owner'S Manual

Search results

Summary of Contents for CD3413

Reviews:

Related manuals for CD3413

Brands by name

Popular brands