57
CAUTION
To avoid the thermal issue. When you replace the back cover, check the
thermal pads should be complete and stuck on the CPU and chip. If the
thermal pads damaged, replace them.
When replace the back cover, the two standoff screws must be installed
as shown below. Tighten both of the screws until they resist and stop.
Thermal pads
Standoff screws
Speaker
Before proceeding, remove the
following FRUs.
• “Back Cover” on page 56.
1. Remove two screws.
2. Remove the speaker.
Summary of Contents for EC-1559
