INMANUUIN182
13
MAINTENANCE
In order to keep an optimum operation of the XENOLUX 180 it is recommended to
perform the following procedures:
• Periodic cleaning of all exterior components.
• Connections inspection.
• Annual technical inspection of the equipment.
To perform any revision or maintenance work, contact your local distributor or the
closest ECLERIS office.
All technical service Works, repairs or modifications shall be noted on the Maintenance
Card of this manual indicating: work performed, date, name and signature of the person
in charge.
CLEANING
Before cleaning the XENOLUX 180, disconnect the power supply cable form the
electrical power.
External Surfaces
Clean the external surface of the equipment using a piece of cotton or cloth moistened
with mild detergent or soap. Use only adequate products for the external cleaning of
electrical equipments, prepared in accordance with the manufacturer’s indications.
Perform the cleaning with special care, avoiding water or humidity access
to the equipment.
Do not use flammable products, especially alcohol when the XENOLUX
180 is hot.
Do not turn the lamp on until one (1) hour has passed from the cleaning,
since an explosive mixture may occur.
It is recommended to clean the exterior surface of the device every 15
days.