56
Set
tings
B.
Indicators for limiter
(limit), thermal protection (thermal), Dante
™
/ AES67
activity, network activity (data) and amplifier operation (on).
C.
GPIs
: indicates the reading values for the GPI and GPOs: shows the status of
the GPO, open or closed. If greyed out, it means that the GPO is event-driven
and if lit, it means that it can be changed via presets.
D.
The
button on the right
returns to the overview.
For more information on the front panel
of the amplifier,
3.
Signal monitor
3.1
The top selector allows you to change which signals are displayed.
3.2
Display and control of a signal. The picture is different depending on the group
selected but all have the same layout.
•
Label
: to distinguish it from other signs. Clicking on Label takes you to the
configuration page.
•
Volume and VU meter
for the signal.
•
Source selected:
clicking in a source takes you to the signal routing page.
•
Impedance selector monitor
: shows the impedance selected on the
commutator on the rear panel.
For safety reasons, the selected impedance cannot be changed via the web
app:
because an unwanted change to impedance could harm the equipment.
An indicator in the upper right corner of each amplifier shows its output status:
•
STBY: output on Standby.
•
0W: output set to 0 W in Smart VersaPower.
•
EXTM: output affected by GPI External Mute
•
NETM:
the output belongs to a network group
that is muted.
•
LOCM: the output belongs to a local group that
is muted.
•
GENM:
the output belongs to the general
volume group that is muted.
•
MUTE:
The output is muted in the audio matrix.
