48
Set
tings
2.
GPIs
Allows
individual configuration of the rear panel GPI ports
:
•
Label:
label, for easy identification. It must be unique for each GPI.
•
Mode
: Analogue or digital mode:
o
Analogue
: Analogue for volume control. Rotary controls 0-10VDC.
o
Digital:
for actions like signal muting, loading presets or playlists, activating
GPO and Play/Pause. Buttons, push buttons, contact closures.
•
Calib.
(GPI calibration
):
o
Place the potentiometer at the end where it gives a minimum reading. Read
the Status value and set the minimum value of the "Calib" control to the
same value.
o
Place the potentiometer at the end where it gives a maximum reading. Read
the Status value and set the maximum value of the "Calib" control to the
same value.
3.
GPOs
Allows individual configuration of the rear panel GPO ports:
•
Label:
label, for easy identification. It must be unique for each GPO.
•
Mode:
Preset or event mode.
o
Preset:
the active or inactive status of the GPOs is stored in the Presets, so
that recovering one of them recovers the combination of active/inactive
GPOs at the time of saving. GPOs configured as preset GPOs are not
available for modification via events.
o
Event
: The active or inactive status of GPOs is determined by events. GPOs
configured as event GPOs are not available for modification via presets.
