46
Set
tings
Network cable not connected
.
Network cable connected
.
Button that
opens settings for network parameters
.
Shows IP addressing:
•
Auto (DHCP):
automatic
addressing. DHCP
server required. Default value.
•
Manual:
manual addressing.
Network parameter
factors:
•
If
NET 1 is configured as Auto (DHCP), and there
is no DHCP server
, it will automatically be
configured with an auxiliary IP addressed and can
be accessed via: 192.168.0.100. Use that address
if you are connecting point-to-point with a
computer.
•
If the
NET 1 and NET 2, networks are connected
,
access to the Internet will be through the
Gateway of NET 1 and NET 2 will have a display
value of 0.0.0.0.
•
The DNSs of NET2 are the same as the NET 1
DNSs when both networks are connected.
2.
Finder:
Function to distinguish the device from other devices in the same location.
When the
Finder function is enabled, the front panel LEDs will flash for 60
seconds.
It is then automatically deactivated.
3.
Internet Connection
: Internet connection check.
