58
Set
tings
1.
Mixer/Matrix
Matrix view selector:
Single
view
/ Full view.
Mixer View
C
click on a fader
to reset to
default value
(0dB).
Crosspoint section for the selected
output
. It takes on the colour assigned to
the corresponding output. From top to
bottom:
•
Source
Label
.
•
Pri: input_n / Sec: input_m,
primary and secondary source
signals. The signal currently on the
source is illuminated.
•
Crossover point
volume control
and VU meter.
•
Enable/disable the crossover
point
at the output. Sources with
the crossover point enabled are
mixed at the corresponding output.
The
VUs
change colour depending on the signal level
:
•
Green
: below 0dB.
•
Orange
: 0-18dB (headroom).
•
Red
: clip, above 18dB, signal saturation.
