B-FOCuS O-4F2PW/O-4G2PW Hardware Installation Manual
Rev.1: Nov 2010
Cambridge Industries Group Co. Ltd
IV
About This Document
Purpose
This guide describes how to install the CIG optical network termination unit (ONT) at the customer
premises.
Intended Audience
This document is intended for technicians responsible for:
z
Unpacking and mounting the ONT and power supply
z
Connecting the ONT to the PON network
z
Connecting services to the ONT
Chapter Overview
This manual is organized as follows:
Chapter 1: Product Description
This chapter describes the introduction to the ONT including physical, electrical, environmental and
optical specifications. Compliance information is also provided.
Chapter 2: Safety
This chapter provides electrical, electrostatic, and laser safety information; fiber optic cable handling
techniques are also discussed.
Chapter 3: ONT installation
This chapter describes installation procedures including site preparation, unpacking and mounting the
ONT, connecting power and fiber optic and cables, connecting service cables, activating the ONT, and
verifying the installation.
Chapter 4: ONT Configuration
This chapter describes configuration of the ONT services,
applications, interfaces and other
configurable parameters.
Chapter 5: Troubleshooting
This chapter explains ONT LED behavior and provides basic troubleshooting guidelines.