B-FOCuS O-4F2PW/O-4G2PW Hardware Installation Manual
02-Oct-2011
ECI Telecom Ltd. Proprietary
21
Rev 0.1
iv)
Routing
Routing configuration is used to configure the static routing parameters.
Below is the description for the parameters:
Parameter
Description
IP Protocol Version
Select the IP Protocol Version
Destination IP Address
Input the destination IP address
Destination Netmask
Input the destination Subnet Mask
Gateway Address
Input the outgoing gateway address
IPv4 Interface
Select the WAN ports that this route uses
Add Button
Click this button, to add a new static routing
rule for above parameters.
After the configurations are done, click “Save” button to save it. Restart the device to make the modification to take
effects