B-FOCuS O-4F2PW/O-4G2PW Hardware Installation Manual
02-Oct-2011
ECI Telecom Ltd. Proprietary
I
Compliance with CE Marking Certification (Class B)
The equipment was tested and found to comply with
EN 60950-1:2001
. The equipment is tested and
only used with power adaptor included in the package.
The equipment complies with the requirements according to the following standard:
ETSI EN 300 386 V1.3.3: 2005
Electromagnetic compatibility and radio spectrum Matters (ERM);
Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements
EN 61000-6-1:2001
: Electromagnetic compatibility (EMC) — Part 6-1: Generic standards Immunity
for residential, commercial and light-industrial environments.
EN 61000-6-3:2001
: Electromagnetic compatibility (EMC) — Part 6-3: Generic standards — Emission
standard for residential, commercial and light-industrial environments, which refers to the following
basic standards:
EN 55 022+A1:2000+A2:2003
：
Information technology equipment – Radio disturbance
characteristics Limits and methods of measurement.
EN 61000-4-2: 1995/+A1:1998/+A2:2001
: Electromagnetic Compatibility (EMC) – Part 4: testing and
measurement techniques – section 2: electrostatic discharge immunity test
EN 61000-4-3: 2002/+A1:2002
: Electromagnetic Compatibility (EMC) – Part 4: testing and
measurement techniques – section 3: radiated, radio frequency, electromagnetic field immunity test
EN 61000-4-4: 2004
: Electromagnetic Compatibility (EMC) – Part 4: testing and measurement
techniques – section 4: electric fast transient/burst immunity test
EN 61000-4-5: 1995/+A1: 2001
: Electromagnetic Compatibility (EMC) – Part 4: testing and
measurement techniques – section 5: surge immunity test
EN 61000-4-6
: 1996/+A1:2001: Electromagnetic Compatibility (EMC) – Part 4: testing and
measurement techniques – section 6: immunity to conducted disturbance, induced by radio frequency
field.
EN 61000-4-11:2004
: Electromagnetic Compatibility (EMC) – Part 4: testing and measurement
techniques – section 11: voltage dips, short interruption and voltage variations immunity test
EN 61000-3-2:2000/+A2:2005
: Limits for harmonic current emissions (equipment input current
<=16A per phase)
EN 61000-3-3:1995/+A1:2001/+A2:2005
: Limitation of voltage fluctuations and flicker in low-voltage
supply systems for equipment with rated current <=16A
