Eci Telecom B-FOCuS 270, Configuration Manual

Page: 45 / 67

B-FOCuS 270/285/400 PR Configuration Manual
ECI Telecom Ltd. Proprietary 45
6.3. Defining a Routed IPoA per RFC 1483
You can define a router in two ways. The basic workflow is simple, but most of the
parameters are defined by default. The advanced workflow enables detailed definition
of most parameters.
6.3.1. Basic Workflow
To define a routed IPoA per RFC 1483 using the basic method:
1. From the Basic operations menu select WAN Setup . The WAN Setup dialog box
appears.
2. Click the RFC 1483 Routed radio button. Define VPI, VCI, encapsulation type
(LLC/SNAP) and check Enable NAPT. Define a WAN IP address and subnet
mask.
3. At the bottom of the dialog box click Add . Check that a line is added to the table
containing the values you have defined.
6.3.2. Advanced Workflow
To define a routed IPoA per RFC 1483 using the advanced method:
1. From the Advanced menu click Configure . Select the radio button in a line with
an available ATM interface (in this example: atm4).
2. At the bottom of the dialog box click Configure Interface . The ATM Interface
Configuration dialog box appears.