manualshive.com logo in svg

Eci Telecom B-FOCuS 270, Configuration Manual, Page: 18 / 67

Share
Download
Eci Telecom B-FOCuS 270 Configuration Manual Download Page 18

B-FOCuS 270/285/400 PR  

Configuration Manual 

ECI Telecom Ltd. Proprietary

  

 

18 

 

2. Define: 

• 

Interface. Only eth0 is supported, as the router acts as a DHCP Server towards 
the LAN. 

• 

IP address range for allocation in the LAN. 

• 

Default gateway (the router’s IP address towards the LAN). 

• 

Subnet mask. 

• 

IP address of the Domain Name Server (DNS). Since the DNS resides in the 
WAN, enter the IP address of the default gateway used to access the WAN. 

• 

The number of days for leasing the address. 

3. Click 

Apply

. 

4.  Perform Save & Reboot. 

5.2.2.  The Router as a DHCP Relay 

 

 

To define the router as a DHCP relay: 

1.  Define the address of the DHCP in the WAN. 
2.  Change the DHCP Relay mode to 

Enable

. 

3. Click 

Apply

. 

4.  Perform Save & Reboot. 

5.3. Firewall 

The firewall filters the traffic between the LAN and the WAN. Logically, it is 
positioned before the router in the WAN, to filter the downstream traffic arriving from 
the Internet and before the router in the LAN, to filter the upstream traffic from the 
LAN towards the Internet.  

Summary of Contents for B-FOCuS 270




































































Reviews:

No comments