manualshive.com logo in svg

Eci Telecom B-FOCuS 270, Configuration Manual, Page: 31 / 67

Share
Download
Eci Telecom B-FOCuS 270 Configuration Manual Download Page 31

B-FOCuS 270/285/400 PR  

Configuration Manual 

ECI Telecom Ltd. Proprietary

  

 

31 

 

To view ATM parameters: 

Click 

Show VCC Quality

. A list of VCCs and their parameters appears. 

 

5.5.3. Defining PPPoE 

The PPPoE tab displays detailed parameters of the dial-up over Ethernet channels. 
Note that the table’s header consists of two lines, and two lines of data are displayed 
accordingly for each channel. 

  

A few channels can be defined simultaneously, and then one of them can be selected 
as a default. Each channel can be started and stopped individually using the Start and 
Stop buttons. Starting a channel activates dial-up from the router to the public 
network. 

5.5.4. Defining PPPoA 

The PPPoA tab displays detailed parameters of the dial-up over ATM channels. Note 
that the table’s header consists of two lines, and two lines of data are displayed 
accordingly for each channel. 

   

A few channels can be defined simultaneously, and then one of them can be selected 
as a default. Each channel can be started and stopped individually using the Start and 
Stop buttons. Starting a channel activates dial-up from the router to the public 
network. 

Summary of Contents for B-FOCuS 270




































































Reviews:

No comments