Eci Telecom B-FOCuS 270, Configuration Manual

Page: 35 / 67

B-FOCuS 270/285/400 PR Configuration Manual
ECI Telecom Ltd. Proprietary 35
2. Define the required port parameters and click Apply .
To activate the definition
Click Enable .
5.7.3. Defining Filtering
The Filters tab presents the filtering parameters of Ethernet nodes. For every node in
the tree (defined by means of a MAC address of a communication unit in the
network), you can define the filtering parameter – whether data arriving from this
node towards the WAN will be blocked or passed. The default is Dynamic, enabling
passage from all nodes via the eth0 interface. If you block the passage from some
nodes, the parameter in the Age column is changed to Static.
Note: You cannot modify a line whose Age parameter is Dynamic. You can only add a
similar line (referring to the same MAC address) whose age parameter is Static. Both
lines are displayed, but the Static line has higher priority.
To view more details:
Click Filter Parameters . The List of Filter Parameters appears.
To add filtering definitions:
1. Click Add . The Filter Configuration dialog box appears.